지원 & 문서
기술 자료, 다운로드 및 자주 묻는 질문
매뉴얼
계측기 세대별로 정리된 제품 매뉴얼. 각 매뉴얼은 여러 언어로 제공됩니다.
ZT-100-B
Water In Oil Monitor — EXD (Generation B)rev2.0.0.003ZT-100-C
Digital Water In Oil Monitor (Generation C)Delivered up to 2026-08-12
Units delivered up to and including 12 August 2026.
Firmware: SIGNAL 0.17.35-sig-c59 · CAP 0.16.37-cap-b38
ZT-100-C Quick StartUnpacking to a live reading: wiring, DIP switches, powering up and checking the measurement. Start here.
ZT-100-C Operating InstructionsComplete operating manual for ZT-100-C Digital Water In Oil Monitor — installation, RS485/USB connection, app and CLI configuration, and field calibration.
CurrentCurrent
Units delivered from 25 August 2026, and any card updated to this release.
Firmware: SIGNAL 0.17.38-sig-c62 · CAP 0.16.40-cap-b41
ZT-100-C Quick StartUnpacking to a live reading: wiring, DIP switches, powering up and checking the measurement. Start here.
ZT-100-C Operating InstructionsComplete operating manual for ZT-100-C Digital Water In Oil Monitor — installation, RS485/USB connection, app and CLI configuration, and field calibration.
Not sure which set applies? On the SIGNAL card's console run `sys version` — the answer names the firmware, and each set above says which firmware it documents.
기술 지원이 필요하신가요?
당사 엔지니어링 팀이 제품 선택, 설치 문의, 문제 해결 및 재교정 서비스를 도와드립니다.
